When you have invested in an aquatic system you will surely be thrilled with the setup and to see the different fishes swimming about. However, the health of the fishes needs to be maintained that requires a lot of provisions. Not only is it enough to feed them regularly with fish food, but also the filtration as well as water pumping and oxygenation should be adequate. If you thought that this takes care of the system completely, you are mistaken. There are harmful microbes that grow naturally on the surface and will lead to diseases and ultimately death of the fishes if one does not take adequate action.
What steps to take?
If you are scratching your head as to how to prevent the growth of harmful microorganisms in the tank there is help at hand. Many are often advised to purchase the UV sterilizer for aquarium at the time when the entire system is being purchased. The raised storage area Adelaide will be helpful to provide the apparatus with the system at the time of purchase. There are several benefits of fitting the apparatus to the system, but the right one needs to be selected as per certain parameters.
Organism growth and type
Even if you purchase and install UV sterilizer for aquarium there is no guarantee that all the organisms will be removed effectively. Even though UV radiation is known to kill protozoa, algae, bacteria and viruses which develop in the water bodies, a higher dose might be necessary for larger organisms like protozoa than for killing algae and bacteria. Some bacteria also develop resistance to UV radiation and that makes these apparatuses less effective.
Power of the bulb
The bulb that is part of the apparatus needs to be of certain wattage in order to be effective. When the voltage is higher, the UV light will be more effective. However, the lamp’s light and effectiveness decrease with age as well. The bulb needs to be replaced every six months as well as cooler temperature will make these apparatuses less effective.
Water turbidity and contact time
There are other factors that influence the effectiveness of the UV bulbs. If the water is turbid, then the penetration of the light is decreased. The bulb should be placed after the filters so that water is clear as possible and the penetration is maximum. The lamp as well as the sleeve needs to be cleaned to keep its effectiveness optimal. If the flow rate of the water is slow, the dwell time is more and the effectiveness of the lamp increases. These factors need to be considered when the water needs to be cleansed of harmful microbes.